SONGMICS UKCS02NB Shelf Risers: Sizes & Cabinet Fit

A closer look.

UKCS02NB is a two-shelf set in Ink Black and Natural Beige. SONGMICS lists metal and engineered wood, with different overall dimensions for the two shelves: 7.7 × 11.7 × 6.2 inches for the larger shelf and 7.3 × 11.7 × 5.4 inches for the smaller one (depth × width × height). Measure each intended position separately. Overall height does not establish the usable space underneath, and the legs can reduce usable width. Check both the cabinet opening and the space needed to lift items out. The manufacturer specifies a maximum static load of 33 lb (15 kg) per shelf. This is a published specification, not an ETVendor test result. Will these shelf risers fit your cabinet? Start with the space inside your cabinet, not its advertised size. Both risers are 11.7 inches wide. The larger one is 7.7 inches deep and 6.2 inches tall; the smaller one is 7.3 inches deep and 5.4 inches tall. These are the manufacturer’s overall dimensions. For example, a measured 12-inch interior width leaves just 0.3 inches beyond the riser’s stated width. That arithmetic is not a fit guarantee: check the door opening, hinges and room to position the assembled shelf. A cabinet with 12 inches of clear vertical space would leave approximately 5.8 inches above the larger riser or 6.6 inches above the smaller one. Your items still need room to lift out. Neither calculation tells you how much usable space is underneath. Before buying, mark out an 11.7 × 7.7-inch rectangle on paper for the larger riser, or 11.7 × 7.3 inches for the smaller one. Place it where the shelf would stand to check the footprint. This paper check cannot verify leg clearance, assembly access or load capacity. If the footprint does not fit, or you cannot confirm clearance for the items underneath, do not assume this model will work. ETVendor has not physically tested this set.

Who this may suit

A cabinet or counter where you have checked the footprint, height and access for your own items.

Conditions & limitations

Usable under-shelf clearance and clear width remain unverified. Follow the supplied instructions for assembly and any stacked arrangement; do not infer a combined stacked load limit. ETVendor has not physically tested this set.

Specifications to consider

Set

Two kitchen counter shelves

Selected finish

Ink Black + Natural Beige

Large shelf overall dimensions

7.7"D × 11.7"W × 6.2"H (19.5 × 29.7 × 15.8 cm)

Small shelf overall dimensions

7.3"D × 11.7"W × 5.4"H (18.5 × 29.7 × 13.7 cm)

Manufacturer-listed material

Metal and engineered wood

Manufacturer-stated maximum static load per shelf

33 lb (15 kg); not an ETVendor test or a combined stacked load limit